MIKE20
Active member
- Joined
- Aug 11, 2004
- Messages
- 7,688
simple tools...Barney bath towel is optional...these buffing polishing boards are great for fretwork...
I like using the small 1/2 round...use the file as a scraper,no pressure applied,scrape or draw from nut towards pickup...
start parallel to board and gently angle downwards as you go back and forth between the nibs...the first few passes you will see the binding starting to come off...then some binding and rosewood...I suggest doing both high E and low E sides of the board only once lightly and evenly and clean it up nicely...
Last edited: