Switch help

Can anyone tell me what lug to attach wire to by looking at this?
Lugs location are not the same. Its a stomp switch(pedal). thanks

Simplest way to find out is to check for continuity with a multimeter to find out which lugs connect to which when the switches are operated. I would hazard a guess that on the left switch the single lug at the top will connect to either one or the other of the lugs at the bottom and on the other switch the centre lug probably connects to either one or the other outer lugs. If this is the case then the single wire would go to the top lug and the two wires would go to one of the bottom lugs (either one - doesn't matter which)

Took me 3 tries , but its the lower 2 lugs.:jim