Keefoman
Active member
- Joined
- Nov 4, 2009
- Messages
- 576
I'm totally aware this forum isn't exactly for Epi fanboys, but this is anyway quite a rare and special guitar, so I'm making this thread anyway.
Since I found out about the Gibson RD ages ago, I've been fascinated by the shape, so when Epiphone released these in 2017 (?), I was intrigued. Came across this second hand a week ago and I got a good deal.
I didn't know who Lee Malia was when Epiphone released his Les Paul signature guitar with similar specs in 2014 or there about. I found out who he was, but I must admit, I still haven't heard much of his work, so that's not the reason I bought this guitar.
The pickups are Gibson P-94 in the neck, and a Gibson 84T-LM in the bridge position which I understand is a tweaked version of the 84T used in a Kramer EVH years ago. The bridge position has a split coil function, but the pots are rather cheap so I'm aiming to do something about that and swap the pots for CTS and better caps. Hopefully, it won't be too hard figuring out how the push/pull pot is connected.
The guitar also has a dummy coil that actually works. Still a little hum in the single coil modes, but not nearly as bad as it would be without it, I suspect.
The headstock has the shape Epiphone did use for years, and I don't particularly like it on Les Pauls and SGs, but on this one, it somehow works with the inlays, binding and shape of the guitar. The tuners are already swapped out for Wilkinsons due to one of the original tuners beeing faulty. Great tuners, but visually, I would have preferred the original gold tulips.
The neck has a very comfortable rounded C profile reminiscent of the profile of an R9. Not the typical wide D shape of most other Epis. The fretboard is composite, but if I didn't know, I would have thought it was Rosewood or Indian Laurel or something like that. The inlays are beautiful and a good replication of the inlays of the Artisan models from the late 70's.
The Epiphone bridge of course buzzes, so that will be replaced by a Faber one with time...
Sorry about taking up your time with a cheap guitar, but then again, you could just ignore it...
Since I found out about the Gibson RD ages ago, I've been fascinated by the shape, so when Epiphone released these in 2017 (?), I was intrigued. Came across this second hand a week ago and I got a good deal.
I didn't know who Lee Malia was when Epiphone released his Les Paul signature guitar with similar specs in 2014 or there about. I found out who he was, but I must admit, I still haven't heard much of his work, so that's not the reason I bought this guitar.
The pickups are Gibson P-94 in the neck, and a Gibson 84T-LM in the bridge position which I understand is a tweaked version of the 84T used in a Kramer EVH years ago. The bridge position has a split coil function, but the pots are rather cheap so I'm aiming to do something about that and swap the pots for CTS and better caps. Hopefully, it won't be too hard figuring out how the push/pull pot is connected.
The guitar also has a dummy coil that actually works. Still a little hum in the single coil modes, but not nearly as bad as it would be without it, I suspect.
The headstock has the shape Epiphone did use for years, and I don't particularly like it on Les Pauls and SGs, but on this one, it somehow works with the inlays, binding and shape of the guitar. The tuners are already swapped out for Wilkinsons due to one of the original tuners beeing faulty. Great tuners, but visually, I would have preferred the original gold tulips.
The neck has a very comfortable rounded C profile reminiscent of the profile of an R9. Not the typical wide D shape of most other Epis. The fretboard is composite, but if I didn't know, I would have thought it was Rosewood or Indian Laurel or something like that. The inlays are beautiful and a good replication of the inlays of the Artisan models from the late 70's.
The Epiphone bridge of course buzzes, so that will be replaced by a Faber one with time...
Sorry about taking up your time with a cheap guitar, but then again, you could just ignore it...