baiselmareo6
New member
- Joined
- Mar 23, 2020
- Messages
- 3
Looking at a 1997 Gibson SG Standard in ebony online.
In one of the pictures the guitar looks pretty worn down to the wood on the top body bevel. Im not 100% with a Gibson nitrocellulose finish. So I was just wondering if this is common to happen along those sharp edges on the face of the SG. The wear line is not very large. Seems to just be along the edge.
Ive been looking for pictures of SG's with similar wear and all I can find are pictures of chunks of the finish that almost looked chipped off. Ill share a picture of the guitar in question.
10.0.0.0.1 192.168.1.254 hotmail.com
In one of the pictures the guitar looks pretty worn down to the wood on the top body bevel. Im not 100% with a Gibson nitrocellulose finish. So I was just wondering if this is common to happen along those sharp edges on the face of the SG. The wear line is not very large. Seems to just be along the edge.
Ive been looking for pictures of SG's with similar wear and all I can find are pictures of chunks of the finish that almost looked chipped off. Ill share a picture of the guitar in question.
10.0.0.0.1 192.168.1.254 hotmail.com
Last edited: