• Guys, we've spent considerable money converting the Les Paul Forum to this new XenForo platform, and we have ongoing monthly operating expenses. THE "DONATIONS" TAB IS NOW WORKING, AND WE WOULD APPRECIATE ANY DONATIONS YOU CAN MAKE TO KEEP THE LES PAUL FORUM GOING! Thank you!

Where to find a 3 position toggle switch for a 3 pickups Les Paul Custom '57 Reissue?

Steph74

New member
Joined
Feb 18, 2020
Messages
14
Where can I find a good quality 3 position toggle switch for a 3 pickups Les Paul Custom '57 Reissue?
The one for the 3 pickups Les Paul Custom are a bit different (at the bottom they have 4 connector on one side (instead of 3, and 2 on the other side)

Thanks in advance
 

PaulD

Active member
Joined
Jun 25, 2007
Messages
673
Switchcraft part number EP-4369-000 is the correct switch for a 3 pickup custom (it has 3 connectors on each end, not the 4 + 2 that you describe).
 

zacknorton

Active member
Joined
Aug 26, 2011
Messages
731
You probably already know about this... but the Freeway 6 position toggle for 3 pickup guitars is an absolute WINNER!

middle pickup by itself is where it's at.
 

Steph74

New member
Joined
Feb 18, 2020
Messages
14
Switchcraft part number EP-4369-000 is the correct switch for a 3 pickup custom (it has 3 connectors on each end, not the 4 + 2 that you describe).

I'll look for that one, do you know if they make it in gold?

As for the one used by Gibson, it really have 4 + 2 connector setup, here's one from a 2019 Les Paul Custom 57 reissue

g3utd3.jpg
 

Steph74

New member
Joined
Feb 18, 2020
Messages
14
You probably already know about this... but the Freeway 6 position toggle for 3 pickup guitars is an absolute WINNER!

middle pickup by itself is where it's at.


will it fit the regular toggle switch hole on the guitar or it need to be enlarged?
 
Top