Guys, we've spent considerable money converting the Les Paul Forum to this new XenForo platform, and we have ongoing monthly operating expenses. THE "DONATIONS" TAB IS NOW WORKING, AND WE WOULD APPRECIATE ANY DONATIONS YOU CAN MAKE TO KEEP THE LES PAUL FORUM GOING! Thank you!
Hey Everyone. I have a Naylor 1x12 combo with a 16ohm speaker. Can I safely add a 1x12 ext cab that has an 8 ohm speaker?
Heres a pic of the current setup. What would I need to do to make this work?
Thanks
You can with a couple of caveats. A 16 ohm and an 8 ohm speaker in parallel will give you a total load of 5.3 ohms so you would probably be best to set the impedance selector to 4 ohms (close enough to make no difference). By using two speakers with different impedances the amps power will be shared unequally between the speakers, the 8 ohm speaker will be taking 67% of the power output and the 16 ohm will take 33%. This obviously means one speaker will be louder than the other and you need to make sure the extra speaker is rated for at least 67% of the amps rated power output.