renderit
Well-known member
- Joined
- Jan 19, 2009
- Messages
- 10,966
One from an automotive store or Wallsmart is fine. It is a guide, not a bible. If you find you want more relief use a larger leaf, what do you care if it is .010, .020 or .040? It is the relief YOU want. By the way, as soon as the rust starts on it it is no longer anything other than a guide anyway. Do you throw it out then? I don't...
I would also recommend:
1) accurate notched straight edge to miss the frets to get the fingerboard straight
2) accurate flat edge to check fret relief after checking above (particularly if you are thinking about ANY filing!)
Stewed Mac has both.
I would also recommend:
1) accurate notched straight edge to miss the frets to get the fingerboard straight
2) accurate flat edge to check fret relief after checking above (particularly if you are thinking about ANY filing!)
Stewed Mac has both.