Les Paul Forum
The Fender Forum
NEW! LPF Facebook Page
LilyPix
Merchandise
Vintage Guitar Registry
LPF Homesite

Go Back   Les Paul Forum > . > Historic District
Register FAQ Mark Forums Read Calendar Calendar Mark Forums Read

Reply
 
Thread Tools
Old 08-28-12, 04:12 AM   #1
Boogie Bill
Les Paul Forum Member
 
Join Date: Oct 2005
Location: Portland, Oregon, USA
Posts: 311
Issues With Replacement Tuners On My R9

Okay, so back in January I bought this 2006 Iced Tea R9 that had been totally beat to heck and abused. It was, at least when it left the factory, a beautiful gloss top version. The figure is not quite flame, not quite quilt--but a beautiful combination of both. However, one of the previous owners (while under the influence of something) had apparently tried to relic the finish using a hot soldering iron and 50-grit sandpaper--including burning 5/8"-tall initials into the flametop below the tailpiece. Enough damage to make a grown man cry--or burst into hysterical laughing.

I got it unbelievably cheap, but...man what a disaster! It probably would have been a good candidate for Historic Makeovers, but due to the economics of my wallet, I decided to not do that at this time, though I may at some point in the future. My luthier, Kerry Char of Portland, Oregon, did some finish touchup for me, including reparing some sections of burned binding. It looks pretty good--most of the heavy damage will pass the three-foot rule, but it certainly doesn't look new. My instruction to Kerry was that I didn't mind if it looked used, but I wanted it to not look abused. He exceeded all my expectations.

I had an older RS Kit to go in it, and used their recommended wiring scheme with the Jensen caps and the BB 1&2 factory pickups. These are NOT potted, and are pretty microphonic.

It didn't have the factory bridge and tailpiece--it looks like the original owner might have put on an aged locking Tone-Pros ABR-1 bridge, and an aged tailpiece. I think it is a Gotoh, and I suspect these parts may have come from RS Guitarworks. Not factory, but they seem to be working fine.

The case is a brown/pink Lifton copy, and it has been reliced, too. Got a broken hinge that is held together and functional with a bent paper clip, and the typical "Look Out!" latches. I haven't decided what to do with the brown Lifton--I'm either going to stick it in the closet or sell it outright; but in the meantime I bought a new black/burgundy Gibson Custom case to transport it in. Big improvement.

But my question is regarding the tuning machines. The guy I bought it from actually apologized for the machines--the original owner had replaced the factory keystones, not with Grovers (which might have been okay), but with Sperzel brushed aluminum locking tuners. The big problem was that they were apparently a self-install--very amateurish, and it was probably done with large amount of alcohol. The faceplate was severely damaged, as the bushings were pounded in with a hammer leaving crescent-shaped dents. The silk-screen was damaged, and the holly veneer cracked around the d-string post. Ouch!

Now everbody knows that Sperzels are simply some of the best tuners around; I have them on several of my G&L guitars and I love their stability and smooth action. But man, do they look WEIRD on a Les Paul! LOL! No complains about the way they work--stringing is a 5 minute job, if that. And my understanding is that they are fairly lightweight. So, when my luthier was putting things back together, I decided to have him touch up the finish on the faceplate, and reinstall the Sperzels.

I'm very happy with the work Kerry did. I have a few minor issues with the guitar itself--the microphonic pickups for one, and I may change the wiring scheme. The neck feels even bigger than my 2006 R8, and isn't nearly as comfortable as my two VOS G0 models.

But I got to wondering...

Are the Sperzels having a negative effect on the tone? Now, my other three Historics have quite a bit of resonance--I can strum a chord and feel the vibrations from the endpin to the top of the headstock--and they shake like crazy! I'm getting SOME of that with the R9, but it is not as pronounced. Are the Sperzels responsible for that? Is the pressure from the bushing nuts restricting the vibration and changing the tone? Does anyone have any specs on the weight of the Sperzels versus the factory tuners?

The guitar is pretty loud acoustically, and sounds great through my Mesa amps, so no complaint there.

But I'm wondering if a set of the Tone-Pros keystones or the factory Gibson Historic replacement tuners will make an audible difference. And why?

Any ideas? Or should I just play the heck out of it and enjoy my new "beater"?

TIA

Bill
Boogie Bill is offline   Reply With Quote
Old 08-28-12, 09:53 AM   #2
Ryan Givhan
Les Paul Forum Member
 
Ryan Givhan's Avatar
 
Join Date: Apr 2009
Location: Lexington Kentucky
Posts: 3,174
Re: Issues With Replacement Tuners On My R9

idk about the tuner, but i really want to see some before and after pics.
Ryan Givhan is offline   Reply With Quote
Old 08-28-12, 10:11 AM   #3
Pat Boyack
Les Paul Forum Member
 
Pat Boyack's Avatar
 
Join Date: Oct 2011
Location: Dallas TX
Posts: 3,132
Re: Issues With Replacement Tuners On My R9

Quote:
Originally Posted by Boogie Bill View Post
But I'm wondering if a set of the Tone-Pros keystones or the factory Gibson Historic replacement tuners will make an audible difference. And why?

Bill
Either of those two will work.

Hey, you bought it cheap. Get some pickups you like, a wiring harness and play it. Unless you send it to HM that's all you can do.
__________________
patboyack.com

"Interview with Texas-based guitarist Pat Boyack - one of most talented blues musicians of his generation"
http://blues.gr/m/blogpost?id=198292...gPost%3A204198

https://www.youtube.com/watch?v=QCWm...WqJXvH-bi5IJBg
https://www.youtube.com/watch?v=kR1egg6TD1M
Pat Boyack is offline   Reply With Quote
Old 09-04-12, 05:48 AM   #4
moozak
Les Paul Forum Member
Classic Club
 
moozak's Avatar
 
Join Date: Jul 2001
Location: indy, indiana
Posts: 457
Re: Issues With Replacement Tuners On My R9

Quote:
Originally Posted by Boogie Bill View Post
Are the Sperzels having a negative effect on the tone?
with all the other stuff that was done to the guitar i'm not so sure i'd worry too much about how those tuners affect tone. lot's of vintage LP players back in the day Grover'ed (or Schaller'ed) their bursts - and we revere those recordings today as the pinnacle of tone. i can see replacing them if you're gonna do the HM thing some day... but other than that...
__________________
-jr-

ǝʌıʇɔǝdsɹǝd ʍǝu ǝןoɥʍ ɐ ɯoɹɟ pןɹoʍ ǝɥʇ ƃuıǝǝs

My guitars: http://www.historiclespauls.com/gear...llector=moozak
moozak is offline   Reply With Quote
Old 09-04-12, 08:53 AM   #5
DANELECTRO
Les Paul Forum Member
 
DANELECTRO's Avatar
 
Join Date: Feb 2003
Posts: 5,621
Re: Issues With Replacement Tuners On My R9

What a hack the previous owner was. How does the guy even have enough brains to hold a job that would allow him to afford such a guitar??? I think we're gonna need to see some of this poor baby.

Regarding the tuners, I've never had a problem with the stock Kluson style tuners and I think the RS Klusons are even better yet. They also shave a bit of weight off of the guitar which is always a good thing in my opinion.

In my experience, microphonic feedback is usually due to the pickup covers not being potted. I've purchased a couple of sets of high end boutique pickups that squealed with high gain and simply resetting the cover fixed them completely. I prefer using a bead of silicone vs wax potting. Here's my technique.

http://www.lespaulforum.com/forum/sh...d.php?t=140030
(post #16)
DANELECTRO is offline   Reply With Quote
Old 09-04-12, 10:03 AM   #6
stock_hippie
Les Paul Froum Member
 
Join Date: Jul 2006
Posts: 4,247
Re: Issues With Replacement Tuners On My R9

a beat up R9 would be cool..thats what id lake..btw i broke my Lynyrd Skynyrd Ann model headstock for the 4th time...sheesh
stock_hippie is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -6. The time now is 10:28 AM.



 



The Les Paul Forum is a privately owned and operated site.
The Les Paul Forum is in no way affiliated with Gibson Musical Instrument Corporation.
All trademarks are the property of GMIC.

All messages on this forum express the views of the author
and do not necessarily reflect the opinions of
The Les Paul Forum and/or it's administration.
The Les Paul Forum will not be held responsible for the content
of any messages posted on this forum.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 1999-2014 Les Paul Forum