Neck Dimensions

I am trying to find out the range of neck thicknesses, say at the 1st & 12th frets on the "50's" neck, 57, 58, 59 and "60's neck". I have a limited run 1982 red standard that has a neck that is .100" thinner than my R6 Goldtop, so I am trying to see if it matches dimensiond for "60's" neck or where it fits in the scheme of things.

Can anybody supply some info?

Thanks,

Bill

Gibson should provide drawings or pictures of all neck´s profiles (1st and 12th frets) on their website... that way we could make a visual comparison among them.

From Gibson :

http://www.netusa1.net/~jrfisher/Html/necks.html


From this forum : from Member " Blauserk "

0.900 - 1.020 - 2003 '54 LP GT (single p-90--Dave’s)
0.920 - ????? - 2003 '57 LP RI ebony
0.920 - 1.040 - 2001 '57 LP GT Aged
0.920 - 1.015 - 2001 '57 LP Black Beaut.
0.885 - 0.975 - 2001 '59 LP RI -Darkburst
0.905 - 0.995 - 2000 '59 LP RI -CherrySb
0.908 - 1.005 - 2000 '59 LP RI -Black
0.908 - 1.015 - 2000 '59 LP RI -Lemon
0.883 - 1.003 - 2000 '59 LP RI -Flamey
0.885 - 0.998 - 1999 '59 LP RI -Quilt
0.895 - 0.995 - 1998 '57 LP Goldtop Reissue
0.880 - 0.985 - 1999 '59 ES-335 Hist.
0.850 - ????? - 2003 '54 Oxblood (Wildwood)
0.840 - ????? - 2003 '54 Flametop Stinger '60 slim taper (MM)
0.850 - ???? - 2003 Rossington SG (3d fret)
0.870 - ???? - 2004 Historic SG/LP ‘61 RI (3d fret)

and more : From forum member " Stymie "

0.784 - 0.820 - Washburn N4 (Shred Plank)
0.770 - 0.835 - ESP Sunburst Tiger (Shred Plank)
0.830 - 0.910 - '67 Tele
0.820 - 0.965 - Fender Relic '56 (99)
0.862 - 0.980 - Fender Relic '56 (96)
0.855 - 0.982 - Fender 50th Anniversary Relic
0.935 - 0.978 - Lentz Maple Strat (unfinished)
0.940 - 0.985 - Lentz Rosewood Strat (finished)
0.830 - 0.930 - Ernie Ball / Music Man Axis
0.845 - 0.900 - Hamer Special FM
0.887 - 0.917 - Hamer Newport
0.800 - 0.xxx - Anderson Standard
0.800 - 0.883 - Suhr C Slim
0.840 - 0.920 - Suhr C Medium
0.890 - 0.980 - Suhr "Big V"
0.850 - 0.970 - Callaham '60 Strat
0.800 - 0.900 - Heritage Standard
0.830 - 0.930 - G&L ASAT Jr.
0.840 - 0.942 - PRS Custom 22 ('Regular' shape)
0.850 - 0.930 - PRS McCarty Rosewood Soapbar
0.868 - 0.958 - PRS McCarty Soapbar
0.915 - 0.985 - Kendrick Townhouse (Offest V-neck)
0.920 - 1.040 - 2001 '57 LP GT Aged
0.920 - 1.015 - 2001 '57 LP Black Beaut.
0.885 - 0.975 - 2001 '59 LP RI -Darkburst
0.905 - 0.995 - 2000 '59 LP RI -CherrySb
0.908 - 1.005 - 2000 '59 LP RI -Black
0.908 - 1.015 - 2000 '59 LP RI -Lemon
0.883 - 1.003 - 2000 '59 LP RI -Flamey
0.885 - 0.998 - 1999 '59 LP RI -Quilt
0.895 - 0.995 - 1998 '57 LP Goldtop Reissue
0.880 - 0.985 - 1999 '59 ES-335 Hist.
-----
Grosh Neck Sizes
0.830 - 0.930 - Medium
0.850 - 0.950 - Md/Large
0.875 - 0.975 - Large
0.900 - 1.000 - Xtra Large
-----
Warmoth Neck Shapes
0.735 - 0.810 - Ibanez
0.800 - 0.850 - Standard
0.815 - 0.940 - Wolfgang
0.825 - 0.950 - SRV
0.835 - 0.910 - Clapton
1.000 - 1.000 - Boatneck (V)
1.000 - 1.000 - FatBack (D)
-----
Baker Neck Shapes
0.820 - 0.920 - Small
0.830 - 0.980 - Standard
0.870 - 0.950 - '59 Series
0.870 - 0.980 - '58 Phat Taper
0.890 - 0.980 - Large (Phat)

Thanks a bunch. That's exactly the type of info I was lookin' for.
Here is what mine measure.

0.805 - 1.002 - '82 Std
0.893 - 0.992 - '06 56 GT
0.908 - 1.002 - '05 57 3PU Custom
0.923 - 1.031 - '05 57 3PU Custom

I'll have to measure my '86 62 Strat Reissue sometime soon and post its dimensions

Bill

What do you guys use to measure the neck like that?

...a micrometer is the most accurate...vernier calipers are good too...